Yanmar B7 sigma Ep Excavator Operation Maintenance Manual Download
FILE DETAILS:
Yanmar B7 sigma Ep Excavator Operation Maintenance Manual Download
LANGUAGE:ENGLISH
PAGES:222
DOWNLOADABLE:YES
FILE TYPE:PDF
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Yanmar B7 sigma Ep Excavator Operation Maintenance Manual Download
Read this manual carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage This manual should be considered a permanent part of your machine and should remain with the machine when you sell it. This machine is of metric design, and consequently the measurements in this manual are also metric. Use only metric hardware and tools as specified. Right-hand and left-hand sides are determined by facing in the direction of forward travel.
TABLE OF CONTENTS:
Yanmar B7 sigma Ep Excavator Operation Maintenance Manual Download
chapter14.pdf................................................................................................... 0 14-1. Loading and unloading the machine.....................................................................122 1) Firmly brake the truck and apply wheel stoppers to the tires. Securely install the ramp plates...........123 2) Return the accelerator lever to reduce engine speed..................................................123 3) Travel toward the ramp plates at a low speed, and load or unload the machine with the implemen.......123 4) Load the machine in a safe position on the truck.....................................................123 14-2. Precautions for loading the machine...............................................................124 1) Place the blade down on the bed of the truck.............................................................124 2) Extend the bucket and arm cylinders to the maximum limit, and slowly lower the boom down on a .......124 3) Stop the engine to take the starter switch key out of the starter switch. (The automatic brake.......124 4) Be sure to lock the control levers with the lock lever...............................................124 5) Provide wood blocks in the front and back of the crawlers and secure the machine with a chain .......124 14-3. Precautions for transporting the machine..........................................................125 14-4. Suspending the machine............................................................................126 1) Swing the upperstructure so that the blade is behind the operator’s seat.................................127 2) Raise the blade to the highest limit.................................................................127 3) Extend the hydraulic cylinders of the front implement (except for the boom swing cylinder) to .......127 4) Stop the engine, and make sure that nothing is left around the operator's seat before leaving .......127 5) Put a slingbelt (or a wire rope) through illustrated in the figure on the right and install sh.......127 6) Put splints on the machine where the slingbelt touches when the slingbelt is pulled..................127 7) Suspend the machine above the ground, wait until the machine is stable and then suspend it slo.......127
PLEASE NOTE:
⦁ This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
⦁ This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
⦁ Require some other service manual or have any queries: please WRITE to us at [email protected].