ROCHESTER CARBURETOR TECHBOOK MANUAL – PDF DOWNLOAD
VIDEO PREVIEW:
IMAGE PREVIEW:
DESCRIPTION:
ROCHESTER CARBURETOR TECHBOOK MANUAL – PDF DOWNLOAD
- About this manual The goal of this manual is to help you obtain the very best your Rochester carburetor has to offer, whether it be performance or economy. Since these carburetors are fine precision instruments, the manual assumes that you already have a basic understanding of how an engine works and are fairly competent with the use of tools and safe working procedures.
- For many, the carburetor represents a portion of a vehicle that just shouldn’t be tampered with, and because of this repairs or modifications to the carburetor are usually left to someone else. A considerable amount of money can be saved and much knowledge can be gained by taking on these tasks yourself.
- This will help you better understand what your vehicle is doing under certain operating conditions, and you’ll be able to tune your carburetor to correct certain problems and extract the maximum performance from you engine. Although these carburetors will primarily be found on General Motors vehicles (Rochester is a subsidiary of GM) they have been used by other manufacturers, too.
- Of the millions of these carburetors in existence, all of them will need attention sooner or later. All of the carburetors covered by this manual are very well made, are relatively simple to overhaul and easy to tune (although tuning a carburetor is usually a trial-and-error proposition). This manual unlocks the “mystery” of the Rochester carburetor. Included are chapters on tools, fundamentals of operation, carburetor identification, troubleshooting, removal and installation, overhaul and adjustments, and selection and modifications. At the end of the manual there’s a glossary of terms used throughout the book.
- In short, everything you need to know to successfully deal with your Rochester carburetor and realize its full potential! How to use this repair manual The manual is divided into Chapters. Each chapter is subdivided into sections, some of which consist of consecutively numbered paragraphs (usually referred to as “Steps”, since they’re normally part of a procedure).
- If the material is basically informative in nature, rather than a step-by-step procedure, the paragraphs aren’t numbered. The first six chapters contain material on preparing for an overhaul, including tool selection and usage, safety and general shop practices. Chapter 7 covers the specifics of the overhaul procedure.
- Chapter 8 deals with selecting the proper carburetor for your application and also contains modification tips. The term “see illustration” (in parentheses), is used in the text to indicate that a photo or drawing has been included to make the information easier to understand (the old cliche “a picture is worth a thousand words” is especially true when it comes to how-to procedures).
- Also, every attempt is made to position illustrations directly opposite the corresponding text to minimize confusion. The two types of illustrations used (photographs and line drawings) are referenced by a number preceding the caption. Illustration numbers denote chapter and numerical sequence within the chapter (i.e. 3.4 means Chapter 3, illustration number 4 in order).
- The terms “Note”, “Caution” and “Warning” are used throughout the text with a specific purpose in mind – to attract the reader’s attention. A “Note” simply provides information required to properly complete a procedure or information which will make the procedure easier to understand. A “Caution” outlines a special procedure or special steps which must be taken when completing the procedure where the Caution is found. Failure to pay attention to a Caution can result in damage to the component being repaired or the tools being used.
- A “Warning” is included where personal injury can result if the instructions aren’t followed exactly as described. Even though extreme care has been taken during the preparation of this manual, neither the publisher nor the author can accept responsibility for any errors in, or omissions from, the information given.
TABLE OF CONTENTS:
ROCHESTER CARBURETOR TECHBOOK MANUAL – PDF DOWNLOAD
Contents
Chapter 1
Introduction
Chapter 2
Tools and equipment
Chapter 3
Carburetor fundamentals
Chapter 4
Carburetor identification
Chapter 5
Troubleshooting
Chapter 6
Carburetor removal and installation
Chapter 7
Overhaul and adjustments
Part A Overhaul tools and preparation 7A-1
Part B One-barrel models: 1M, 1 MV, 1 ME, 1 MEF 7B-1
PartC Two-barrel models: 2G, 2GC, 2GV 7C-1
Part D Quadrajet four-barrel models: 4MC, 4MV,
M4MC, M4MCA, M4MEA. M4MED, M4MEF,
E4MC, E4ME
Dualjet two-barrel models: M2MC, M2ME,
E2MC, E2ME 7D-1
Part E Varajet two-barrel models: 2SE, E2SE 7E-1
Chapter 8
Selection and modification
Conversion factors
Glossary
Index
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.