Perkins 1100 Series Workshop Manual
File Details:
Perkins 1100 Series Workshop Manual
Language : English
Pages : 274
Size : 1.11 MB
Downloadable : Yes
Format : PDF
Video Preview:
Image Preview:
Table Of Contents:
Perkins 1100 Series Workshop Manual
1 General information
Introduction …1
Engine views …. …2
Engine identification . …3
Safety precautions …5
Engine lift equipment …7
Viton seals … .8
POWERPART recommended consumable products . …9
2 Specifications
Basic engine data …. .11
Data and dimensions .12
Thread sealant .29
Standard torque values .30
Specific torque values .. .31
Compression test data …. .34
Description:
Perkins 1100 Series Workshop Manual
introduction This Workshop Manual has been written to provide assistance in the service and overhaul Of Perkins 1100 Series 4 cylinder engines. It should be used in conjunction with normal workshop practise and information contained in current service bulletins.
Mention of certain accepted practices therefore, has been purposely omitted in order to avoid repetition. For overhaul procedures the assumption is made that the engine is removed from the application.
The engine conforms with USA (EPA/CARB) stage 2 and EEC stage 2 emissions legislation for agriculture, construction and industrial applications. Most of the general information which is included in the relevant User’s Handbook has not been repeated in this workshop manual and the two publications Should be used together.
Where the information applies only to certain engine types, this is indicated in the text. The details of some operations will be different according to the type of fuel injection pump which is fitted.
The specific pump type used can be found by reference to the manufacturer’s identification plate on the pump body but, generally, the type of pump fitted is as shown below: C Delphi – DP210 Series 0 Bosch – VP 30 0 Bosch – EPVE.
When reference is made to the “left” or “right” side of the engine, this is as seen from the flywheel end of the engine. Special tools have been made available and a list of these is given in Chapter 16, Special tools. Reference to the relevant Special tools is also made at the beginning of each operation.
POWERPART recommended consumable products are listed under “POWERPART recommended consumable products” on page 9. Reference to the relevant consumable products is also made at the beginning of each operation. Data and dimensions are included in Chapter 2, Specifications.
Read and remember the “Safety precautions” on page 5. They are given for your protection and must be used at all times. Danger is indicated in the text by two methods: Warning! This indicates that there is a possible danger to the person. Caution: This indicates that there is a possible danger to the engine.
Note: Is used where the information is important, but there is not a danger.
Please Note:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]