Liebherr LH 30 C Litronic 1210 Machine for Industrial Operator’s Manual SN 73122 – PDF DOWNLOAD
FILE DETAILS:
Liebherr LH 30 C Litronic 1210 Machine for Industrial Operator’s Manual SN 73122 – PDF DOWNLOAD
Language : English
Pages : 326
Downloadable : Yes
File Type : PDF
DESCRIPTION:
Liebherr LH 30 C Litronic 1210 Machine for Industrial Operator’s Manual SN 73122 – PDF DOWNLOAD
Product ID
Manufacturer: Liebherr-Hydraulikbagger GmbH
Type: LH 30 C Litronic
Type no.: 1210
From Serial no.: 73122
Preface:
- This operating manual is intended for you as the machine operator or as a member of the maintenance personnel. It contains warnings, important information and tips for working with the machine. It simplifies the process of familiarisation and getting to know the machine, and helps to avoid faults caused by incorrect operation.
- Compliance with the operating manual increases the reliability and service life of the machine.
- The operating manual must be kept with the machine. Make sure that a copy is always kept close to hand at the workplace.
- Read the operating manual before initial commissioning and subsequently at regular intervals. Everyone who carries out work with or on the machine must be familiar with and use this operating manual.
Examples of this work:
– Operation including setup and fitting attachments, elimination of faults, care,
disposal of service products and consumables
– Maintenance including servicing, inspection and repair
– Transporting or loading the machine
- The owner is responsible for supplementing the operating manual with instructions based on existing national regulations on accident prevention and environmental protection. In addition to this operating manual and the regulations on accident prevention applicable in the user’s country and at the place of use, it is also necessary to comply with the recognised technical rules on safety and technically proficient working.
- Some sections of this operating manual do not apply to all machines.
- Some illustrations in this operating manual may show details and implements that are different from your machine.
- In some illustrations, protective devices and covers have been removed to provide a clearer representation.
- Liebherr machines are subject to continuous development and improvement. This may have resulted in modifications to your machine which are possibly not referred to in this operating manual.
- If you require further explanations or information, please contact Liebherr customer service.
TABLE OF CONTENTS:
Liebherr LH 30 C Litronic 1210 Machine for Industrial Operator’s Manual SN 73122 – PDF DOWNLOAD
1.1 Technical description 18
1.1.1 General overview 18
1.1.2 Uppercarriage 19
1.1.3 Undercarriage 20
1.2 Technical data 21
1.2.1 Vibration emission 21
1.2.2 Sound level 22
1.2.3 Specifications 22
2 Safety warnings 23
2.1 Information on these instructions 23
21.1 Representation of warning messages 23
2.1.2 Graphic symbols in these instructions 23
2.2 Intended use 24
2.21 Laws, rules, guidelines and safety regulations 24
2.2.2 Intended use 24
2.2.3 Foreseeable misuse 25
2.2.4 Operating conditions 25
2.2.5 Disposal 26
2.3 Description of staff 27
2.3.1 Personal protective equipment 27
2.3.2 Requirements for staff 27
2.3.3 Operating company 28
2.3.4 Operator 28
2.3.5 Maintenance staff 29
2.3.6 Electrical engineer 30
2.3.7 Refrigeration technician 30
2.3.8 Rigger 3
Signs on the machine 33
2.41 Warning signs 33
2.42 Information signs 41
2.4.3 Control description sticker 49
2.44 Identification plate 49
Protective devices on the machine 50
2.51 Safety lever or folding console 50
2.5.2 Operator’s cab 50
2.5.3 Height-adjustable operator’s cab 50
2.5.4 Tip over protective structure (TOPS) 51
2.5.5 Roll over protective structure (ROPS) 51
2.5.6 Falling object protective structures (FOPS and FGPS) 52
Emergency equipment on the machine 52
2.6.1 Emergency exit (standard) 52
2.6.2 Fire extinguisher (option) 53
2.6.3 Emergency command devices of machine 53
26.4 Emergency stop function of machine 53
Safe operation 54
2.7.1 Intoxicants 54
2.7.2 Dangerous fuels and operating fluids 54
2.7.3 Transporting machine 54
2.7.4 Access to machine 55
2.7.5 Machine danger zone 56
2.7.6 Visibility 56
2.7.7 Protection against vibration 57
2.7.8 Operation of machine 58
2.7.9 Load-lifting work 60
Safe work 61
2.8.1 Machines with electric drive 61
2.8.2 Machines with height adjustable cab 62
Safe maintenance 63
29.1 Spare parts 63
2.9.2 Heavy parts 63
2.9.3 Regular checks 64
2.10.1 Modifications, add-ons and retrofittings 64
3 Control and operation 65
3.1 Control and operating elements 65
3.1.1 Overview of operator’s platform 65
3.1.2 Control unit A 67
3.1.3 Control unit B 67
3.1.4 Further control units 68
3.2 Control 69
3.2.1 Battery main switch 69
3.2.2 Entering and exiting machine 70
3.2.3 Step lighting (option) 70
3.2.4 Emergency exit 71
3.2.5 Fire extinguisher (option) 72
3.2.6 Safety lever 72
3.27 Operator’s seat 73
3.2.8 Safety belt 78
3.2.9 Exit protection (option) 79
3.2.10 Ignition key 80
3.2.11 Horn 81
3.2.12 Raising and lowering operator’s cab (option) 81
3.2.13 Windscreen 82
3.2.14 Sun blind 85
3.2.15 Exterior mirrors 86
3.2.16 Lighting 87
3.2.17 Cab lighting system 88
3.2.18 Beacon (option) 88
3.2.19 Windscreen wipers 89
3.2.20 Windscreen washer system 90
3.2.21 Display 91
3.2.22 Status symbols 92
3.2.23 Start page menu 105
3.2.24 Camera menu 1056
3.2.25 Automatic heating and automatic ventilation 1073.2.26 Automatic air conditioning 110
3.2.27 Operating status menu 114
3.2.28 System settings menu 114
3.2.29 Function settings menu 122
3.2.30 Information menu 129
3.2.31 Tool Control menu 132
3.2.32 Service codes menu 132
3.2.33 Auxiliary heater (option) 133
3.2.34 Radio system 134
3.2.35 LiDAT (option) 136
3.3.1 Inspection tour before putting into service 137
3.3.2 Refuelling 137
3.3.3 Refuelling with electric refuelling pump (option) 139
3.3.4 Preheating system (option) 140
3.3.5 Immobiliser (option) 142
3.3.6 Preparing machine for dust intensive application 143
3.3.7 Preparing machine for use in biologically sensitive areas 144
3.3.8 Starting diesel engine 144
3.3.9 Bringing machine to operating temperature 145
3.3.10 Engine speed and operating mode 145
3.3.11 After starting 147
3.3.12 Sensor-controlled low idle automatic 148
3.3.13 Automatic engine shut-off after idling (option) 148
3.3.14 Shutting off diesel engine 149
3.3.15 Travelling 150
3.3.16 Braking 154
3.3.17 Travel alarm (option) 155
3.3.18 Controlling working attachment 1565
3.3.19 Turning and braking uppercarriage 158
3.3.20 Overload warning system (option) 160
3.3.21 Selecting boom or working tool 161
3.3.22 Adjusting boom vertically 162
3.3.23 Hoist cylinder protection 163
3.3.24 Selecting the working tool 164
3.3.26 Controlling special working attachment with mini-joystick 166
3.3.27 Changing over control of right mini-joystick (option) 167
3.3.28 Grapple priority (option) 169
3.3.29 AutoLift (Option) 170
3.3.30 Magnet system (option) 170
3.3.31 Reversible fan drive for radiator cleaning (option) 171
3.4 Shut-off functions 174
3.4.1 Stick cylinder shut-off (option) 174
3.4.2 Height limitation 177
3.5 General working methods 192
3.5.1 Working without damaging the machine 192
3.5.2 Putting machine in working position 193
3.5.3 Transferring loads 194
3.5.4 Loading transport vehicle 194
3.5.5 Lifting loads 195
3.56.6 Use of banksmen 195
3.6 Installing and removing working attachment 197
3.6.1 Using quick coupler 197
3.6.2 Installing and removing grapple on industrial stick 197
3.7 Parking machine 200
3.8 Transport 201
3.8.1 Preparatory activities 2M
3.8.2 Driving machine onto low-loader 201
3.8.3 Lifting machine 202
3.8.4 Tying down the machine 203
3.9 Emergency operation 204
3.9.1 Jump starting 204
3.9.2 Lowering working attachment when engine is shut off 205
3.9.3 Lowering operator’s cab in an emergency (option) 205
3.9.4 Towing the machine 206
4 Malfunctions 207
4.1 Service code tables 208
41.1 Warning symbols 208
5.6.1 Welding 255
5.6.3 Corrosion-proofing piston rods 255
5.6.4 Cleaning the machine 256
5.6.5 Cleaning the fan and radiator 258
5.7 Complete machine 259
5.7.1 Checking machine for proper condition and tightness 259
5.7.2 Lubricating bearings on machine and working attachment 259
5.7.3 Checking components for cracks 261
5.7.4 Lubricating hinges, locks and gas pressure springs of doors, hoods and
windows 261
5.7.5 Cleaning and treating rubber seals on doors and hoods 261
5.8 Drive group 262
5.8.1 Diesel engine: Bringing into maintenance position 262
5.8.2 Diesel engine: Checking oil level 262
5.8.3 Diesel engine: Checking condition, tightness and cleanliness 263
5.8.4 Fuel pre-filter: Draining water 264
5.8.5 Air filter: Emptying dust collecting tank 265
5.8.6 Air filter: Replacing main filter cartridge 266
5.8.7 Air filter: Replacing safety filter cartridge 268
5.8.8 Air filter and air lines: Checking tightness and condition 269
5.8.9 Pump distributor gear: Checking oil level 271
5.8.10 Diesel particulate filter (option): Activating and deactivating
regeneration 272
5.9 Cooling system 278
5.9.1 Checking coolant level 278
5.9.2 Checking cooling system and heat exchanger for contamination and
cleaning 279
5.10 Working hydraulics 280
5.10.1 Depressurising hydraulic system 280
5.10.2 Hydraulic tank: Checking oil level 280
5.10.3 Return filter: Checking and cleaning magnetic rod 283
5.10.4 Bypass filter (option): Checking degree of contamination of filter
cartridge 284
5.11 Electrical system 285
5.11.1 General information 285
5.12 Travel gear 286
5.12.1 Checking track tension 286
5.12.2 Tightening track 287
5.12.3 Slackening track 288
5.12.4 Track pads and sprocket wheels: Checking mounting 289
5.12.5 Checking tracks, sprocket wheels, idler-wheels, carrier rollers and track
rollers for wear 291
5.12.6 Visual inspection of travel gear components 291
5.12.7 Tyres: checking foam-filled tyres 291
5.13 Working attachment 292
5.13.1 Lubricating working tool 292
5.13.2 Checking pin connections for secure seating 292
5.13.3 Checking steel structure for cracks 292
5.13.4 Pin bearing: Checking for wear 293
5.14 Operator’s cab, heating and air conditioning 294
5.14.1 Filling with windscreen washer fluid 204
5.14.2 Heating: Checking function 294
5.14.3 Auxiliary heater (option): Checking function 296
5.14.4 Switching on air conditioning unit 296
5.14.5 Checking condenser for contamination and cleaning if necessary 296
5.15 Lubrication system 298
5.15.1 Lubrication system: Filling grease 298
5.15.2 Checking lubrication of bearings (grease collar) 298
5.16.3 Pipes, hoses and lubricating points: Checking tightness and condition 299
6 Appendix 301
Index 303
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V