Hitachi EX2500 & EX3600 Excavator Technical Operations Manual (MNCO1027A)
File Details:
Hitachi EX2500 & EX3600 Excavator Technical Operations Manual (MNCO1027A)
- Manual Language:English
- Pages: 82
- Size: 4.86 MB
- Downloadable:Yes
- Format:PDF
Video Preview:
Image Preview:
Sample Page From The Manual:
Hitachi EX2500 & EX3600 Excavator Technical Operations Manual (MNCO1027A)
· Suspension Adjustment (dampening)
To adjust the ride or dampening effect of the seat turn the Seat Damper dial clockwise to increase the dampening effect, or anticlockwise to decrease the dampening effect. As a guide, you may turn the dial to set your own body weight (in kilograms).
· Console/Seat Fore/Aft adjustment
The seat and/or the seat and console (control levers and seat) may be adjusted forward or backward to suit your needs.
– to adjust the seat only, lift the Seat Fore/Aft Adjustment bar while pushing or pulling the seat in the direction required.
– to adjust the seat and console together, lift the Console
Fore/Aft adjustment lever while pulling or pushing the unit in the direction required.
· Lumbar Support Adjustment
Lower back lumbar support may be adjusted by turning the dial located on the left side of the back rest. Turning the dial anticlockwise will increase lumbar support.
· Headrest adjustment
The headrest can be adjusted both in angle and height.
– to raise or lower the height of the headrest, grasp it firmly with both hands and pull up or push down to the desired position.
– to tilt the headrest, hold the headrest while tilting it forward or backwards to suit your requirements.
Table of Contents:
Hitachi EX2500 & EX3600 Excavator Technical Operations Manual (MNCO1027A)
Section Page
Competency Elements & Performance Criteria – Flow Chart 7
Element 1027.1 PLAN & PREPARE FOR OPERATIONS (Refer Mining Department Area Specific Induction) 9
Element 1027.2 OPERATE HYDRAULIC SHOVEL/EXCAVATOR
CT 2.1 Resolve Coordination Activities with Others (Refer Mining Department Area Specific Induction) 11
Walk-around Inspection Checklist 12
EX25/36 2.2 Carry Out Pre-start, Start Up , park-up and Shutdown Procedures 16
EX25/36 2.3 Select Loading Method for Excavator 46
EX25/36 2.4 Conduct, Control and Monitor Dig Procedures 29
EX25/36 2.5 Act on or Report Monitoring Systems & Alarms 53
EX25/36 2.6 Recognise & Respond to Hazardous & Emergency Situations 59
CT 2.7 Complete Work to Planned Outcomes (Refer Mining Department Area Specific Induction) 69
Formative Assessment
Element 1027.3 RELOCATE EXCAVATOR
CT 3.1 Receive & Confirm Route & Location Plan (Refer Mining Department Area Specific Induction) 71
EX25/36 3.2 Complete and/or Follow Ground Preparation 72
CT 3.3 Resolve Co-ordination Issues, Support Equipment & Personnel (Refer Mining Department Area Specific Induction) 72
EX25/36 3.4 Relocate Excavator 73
Element 1027.4 CARRY OUT OPERATOR MAINTENANCE
EX25/36 4.1 Carry Out Inspections & Fault Finding 75
EX25/36 4.2 Carry Out Routine Operational Servicing, Lubrication, Maintenance & Housekeeping 76
EX25/36 4.3 Carry Out Minor Maintenance 78
EX25/36 4.4 Provide Support for Major Maintenance 81
CT 4.5 Process Maintenance Records (Refer Mining Department Area Specific Induction) 81
Please Note:
⦁ This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
⦁ Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.