Fendt Eu Harvesting 8370P 8370P AL 8400P 8400P AL Stage 2 Combines Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Fendt Eu Harvesting 8370P 8370P AL 8400P 8400P AL Stage 2 Combines Operator’s Manual – PDF DOWNLOAD
1.1 Dear Customer
1.1.1 Appropriate Use
- This self- propelled combine harvester is manufactured exclusively for usual agricultural purposes (appropriate
use - Any other use is considered as being contrary to the appropriate use. AGCO declines all liability in cases of physical damage or injuries resulting from non-appropriate use. The risk lies exclusively with the user.
- The conformity and strict adherence to the operating, maintenance and repair requirements specied by AGCO are also essential factors for appropriate use
- This self-propelled combine harvester may be used, serviced and repaired only by personnel having full knowledge of its specific features and who are aware of the danger involved and the applicable safety rules (prevention of accidents)
- It is the responsibility of the owner/user to ensure prescribed safety precautions and other general technical, health and safety and road-safety observed AGCO disclaims all liabaitility to any claim resulting from the fitting of non-approved parts or accessories or unauthorised modification or alteration .
- Customers a 「e strongly recommended to contact an AGCO dealer in the event of after-sale problems and for any adjustments that may be necessary
General
Information
Electromagnetic radiation All the electric components of the machine emit an Electromagnetic field that varies depending on the function of the component. A maximum limit is set for this Electromagnetic aadiation in o 「der to avoid inte 「fe reference and damage to machine operation and controls. The CE marking on the machine shows that it meets the demands on Electromagnetic compatibility, which is desribed in the Directive 2004/108/EC
TABLE OF CONTENTS:
Fendt Eu Harvesting 8370P 8370P AL 8400P 8400P AL Stage 2 Combines Operator’s Manual – PDF DOWNLOAD
1 General Information 11
1 1 Dear Customer 13
111 Appropriate Use 13
112 Changes and Improvements 13
113 Directives 13
114 Preface 14
115 EC Declaration of Conformity for Combine and Table 15
116 Product Identification 18
117 Sketch and parts identification 19
118 Disposal 20
2 Safety 23
21 Safety 25
211 General Safety Precautions 25
212 Attention – Warning Symbols 25
213 Safety Precautions 25
214 Road Transport 27
215 Warning/Instruction decals 28
216 CE Marking and Type Plate on the Combine 32
217 Position of CE Markings and Type Plate 41
3 Operation, Controls and Cab 45
31 Before Start 4 7
311 Before Start 47
32 Operator cab 49
321 Arrangement and Controls 49
322 Optional Extra 50
33 Safety Precautions – on the Move 51
331 Safety Precautions – on the Move 51
34 Starting and Stopping the Engine 52
341 Starting the engine 52
35 Drive Controls 55
351 Multifunction Lever 55
352 Adjustable Armrest and Control Panel 56
353 Change of Gears 57
354 Reduced Engine Revolutions in Road Transport (Speed Matching System) 58
355 Steering column 58
356 Brakes 59
36 Seats 60
361 Adjustment of Operator Seat 60
362 Adjustment of Air-Suspended Seat 60
363 EF declaration of conformity for the operator seat 61
364 Safety Switch in Operator Seat – (Operator Present Switch) 62
365 Safety belt 63
366 Passenger seat 63
37 Mirrors 64
371 Electrically adjustable rearview mirrors 64
38 Accessibility 65
381 Ladder for Cab 65
382 Ladder for Engine Compartment 65
383 Cleaning the Windscreens 66
FENDT 8370 P – 8400 P – EAME
D3151100M4 – SIN 580010001
3
Table of contents
39 Emergency Situations 68
391 Emergency Exit 68
392 Fire Extinguisher 69
310 Light and Lamps 70
3101 Lights 70
3102 Main Light and Work Light 71
311 Climate control 72
311 11 Maintenance and overview 72
311 2 Operation of climate control 73
312 Printer 75
3121 Exchanging Paper and Ribbon in Printer 75
3122 Inserting the Paper Roll 75
3123 Fitting the Ribbon 76
313 Optional Extra 77
3131 Four-Wheel Drive 77
3132 Reversing camera 79
3133 Auto-Steering 79
4 Operation, FIELDSTAR 81
41 Safety p recautions 83
411 Safety precautions, Operating FIELDSTAR 83
42 FIELDSTAR 84
421 FIELDSTAR in general 84
422 Operating FIELDSTAR on Terminal 85
423 Operating the Terminal by Remote Control in the Multi-Function Lever 86
424 Contrast and Brightness Control 87
425 C leaning of terminal 87
426 Data card 88
427 FIELDSTAR Menu Structure 88
43 Harvest Menu 90
431 Instrument Reading 90
44 Main Menu 94
441 Main menu structure 94
45 Monitoring 96
451 Monitoring in general 96
452 Shaft Speeds 97
453 Engine Monitoring/Alarm 97
454 Engine Safety Alarm 97
455 Information 98
456 Shaft Speeds 99
46 H arvesting Data 100
461 Standard data 100
462 Data Logging in General 101
463 Using Data Logging 102
464 Data Logging Setup 109
465 Using Markers 112
47 Operator’s Manual 113
471 Harvest Settings 113
472 Routine Servicing 114
473 FIELDSTAR 114
48 Di iagnostics 115
481 Troubleshooting in FIELDSTAR 115
49 Coding 121
491 Codingingeneral 121
492 Clock Adjustment 122
493 Language 122
494 Area Measuring 122
495 Table Calibration 124
496 Returns Volume 125
497 Grain Loss Monitor 125
498 Shaft alarm calibration 125
499 Concave Calibration 126
4 FENDT 8370 P – 8400 P – EAME
D3151100M4 -SIN 580010001
Table of contents
4910 Constant Flow 126
4911 Wheel Track and Auto Level Combine 126
4912 Coding of Electrical Straw Deflectors 127
4913 Lead Time and Lag Time 129
4914 Calibration of actuator for electrical sieves 130
410 Settings 131
4101 Harvest Settings 131
4102 Table Settings 134
4103 Machine Settings 136
411 Returns Volume Monitor 139
411 1 Returns volume 139
411 2 Coding 139
412 Grain Loss Monitoring 141
4121 Sensors 141
4122 Adjustment of Grain Loss Sensors 141
413 Shaft Alarm Limits 143
4131 Shaft Alarm Calibration 143
414 Yield meter 144
4141 Yield Meter (Isotopic) 144
4142 Micro-Trak Yield Meter 146
4143 Yield Meter Calibration 148
4 15 Moisture meter 150
4151 Limitations in the use of the moisture meter 150
4152 Continuous Moisture Measuring 150
4153 Measuring Principle 150
4154 Using the Moisture Meter 151
4155 Cleaning the Moisture Meter, 151
4156 Calibration of moisture meter 152
416 Cutting height control 154
4161 Adjustment and operation of cutting height control 154
4162 Coding of table 157
417 Field pressure control 158
4171 Adjustment and operation of field pressure control 158
418 Interaction between the Table Controls 160
4181 Table controls, an outline 160
419 Auto Level Table 162
4191 Principle of Auto Level table 162
4192 Bleeding 163
4193 Coding of Auto Level Table 164
4194 Calibration of Table Angle 164
420 Operation of Auto Level Table 166
4201 Using the Auto Level Table 166
421 Ground sensors 168
421 1 Checking and Adjusting the Ground Sensors 168
422 Constant Flow 170
4221 Constant Flow functional description 170
4222 Start-up and Adjustment of Constant Flow 171
4223 Constant Flow Engagement 173
5 Operation, Auto Level Combine 175
51 Safety p recautions 177
511 Safety precautions, operation of Auto Level Combine 177
512 Safety System 177
52 Attachment of Auto Level Table 178
521 Attachment of Table to Auto Level Combine 178
53 C ombinations 179
531 Automatically or manually 179
532 Selecting Combination 179
533 Combinations for Auto Level combine and Auto Level table 179
534 Priority of hydraulic functions 181
54 Auto Level 182
541 Auto Level combine 182
FENDT 8370 P – 8400 P – EAME
D3151100M4 – SIN 580010001
5
Table of contents
542 Manual Control of Auto Level Combine 182
55 Auto Level Combine/Table 183
551 Combine 183
552 Transport 184
553 Auto Level Table 185
56 Calibration 186
561 Calibration of Auto Level Combine 186
562 Errors during Calibration 187
57 Coding 188
571 Coding of Auto Level Table 188
572 Zero Cutting Height 188
58 Safety System 189
581 Safety System, Auto Level 189
582 Automatic Control of the Tilt Sensor Function 189
583 About the system 190
584 Hose Breach Protection for Auto Level Hydraulics 190
59 T roubleshooting 191
591 Trouble shooting in general 191
592 Machine Not Levelling Correctly 192
510 Servicing and User Tips 194
5101 Retrofit of new FIELDSTAR Auto Level Job Computer and Sensors 194
5102 Unintentional Use of Manual Keys in Automatic Mode 194
5103 Diagnostics – Auto Level Combine Functions and Sensors 195
6 Motor 197
61 Safety precautions 199
61 1 Safety Precautions, Engine 199
62 Engines 200
621 Engine Types 200
63 Air-intake 201
631 Filter system 201
64 Cooling System 202
641 Rotary Screen and Dust Aspirator 202
642 Coolers 203
643 Coolant 204
644 Checking the Fan Belt Tension 204
65 Fuel System 205
651 Fuel system 205
652 Filter Change 206
66 Engine oil/change 207
661 Oil and Filter Change 207
67 Cleaning 208
671 Cleaning of engine compartment 208
68 EEM3 Engine Management 209
681 Electronic Engine Management 209
682 Engine Trouble Shooting (Self-Diagnosis) 210
683 EEM3 codes 211
7 Cutting Tables 217
71 Safety p recautions 219
711 Safety Precautions, Cutting Tables 219
72 Attachment/Removal of Table 220
721 Attachment of Table, Standard and Auto Level 220
722 Removal of Table 221
723 Supports 222
73 Table trailer 223
731 Attachment of combine and trailer 223
732 Table Trailer Brakes 223
74 Reel 224
741 Reel Adjustment Up/Down, Fore/Aft 224
742 Bleeding 225
743 Reel Rotation 225
6 FENDT 8370 P – 8400 P – EAME
D3151100M4 -SIN 580010001
Table of contents
744 Reel tine bars 226
745 Adjustment of the Reel in the Table 226
75 Knife 227
751 Knife and knife drive 227
76 Feeding 228
761 Table auger 228
762 Cut-off strip and distribution strip 229
763 Replacement of Feathering Fingers 230
764 Auger Flight Extensions, 20-22-25-30’Tables 230
765 Reversing 231
77 T ransm1ss1on 232
771 PowerFlow Table, Knife Drive and Table Auger 232
772 Slip Clutch for Table Auger 232
78 PowerFlow Table 233
781 PowerFlow belts 233
782 Inspection and Start-Up of PowerFlow Belts 233
783 Adjustment of belts 234
784 Scrapers, front 234
785 Scrapers, Rear, and Adjustment of Bearing Housings 235
786 Table bottom 235
787 Cleaning 236
79 Crop Lifters 237
791 Using Crop Lifters 237
710 Vertical Knives, Rape Auger and Straw Dividers 238
7101 Vertical knife 238
7102 Mounting of Vertical Knife 238
7103 Rape auger 239
7104 Folding torpedo dividers and bow dividers 239
7105 Mounting of Straw Dividers 240
7106 Adjustment of Torpedo Divider 240
711 Fixed Fingers 241
7111 Fitting of fixed table auger fingers 241
7112 Using Fixed Table Auger Fingers 241
7113 High Table Sides 241
712 Main crop elevator 243
7121 Elevator Chain 243
7122 Transmission for Table 243
7123 Stone Trap 244
7124 Initial Adjustment of Cutting Height Indication 245
8 Operation of Table and Threshing Unit 247
81 Safety p recautions 249
811 Safety Precautions, Operation of Machine and Cutting Table 249
82 Operation of Table 251
821 Table Height and Table Automatic Control 251
822 Cutting Height Control 252
823 Field Pressure Control 253
824 Preset cutting height 254
825 Auto Level Table 254
826 Table Engagement – Emergency Stop 255
83 Threshing Unit Transmission 256
831 Threshing unit engagement 256
832 Cylinder Variator 257
833 Turning Tool for Cylinder 257
84 Concave Setting, Electrically Adjustable 258
841 Operation of Concave 258
842 Concave Setting 258
85 Threshing 260
851 Concave filler plates 260
852 Straw walkers 260
853 Rear beater curtain 261
86 Straw Chopper and Spreader Hood 262
861 Straw chopper 262
862 Adjustment of Spreader Hood 264
863 Counter Knives and Cross Bar 265
864 Replacement of Knives 267
87 Fanning Mill and Sieves 268
871 Fanning mill 268
872 Shaker shoe 268
873 Shaker Shoe with Electrical Sieves 269
874 Manual Adjustment of Sieves 269
875 Cleaning of Sieves and Main Grain Pan 270
876 Cleaning the Sieves 271
877 Shaker Shoe Light 273
878 Special sieves 273
88 Internal Grain Transport 274
881 Auger Housing/Elevators 274
882 Returns thresher 274
883 Tank filling auger 275
884 Grain tank 276
885 Unloading auger 278
886 Unloading Auger Clutch 279
887 Unloading tube 280
89 Rotary Separator 281
891 Adjusting the revolutions 281
892 C oncave setting 282
810 Straw hood 283
8101 Alarm switch for straw hood blocked 283
8102 Light in straw hood 284
811 Chaff spreader 285
8111 Setting 285
812 Maxi Spreader 287
8121 Operation and Adjustment 287
8122 Adjustment of Sensors 288
813 Maize Threshing 289
8131 Maize Threshing in General 289
8132 Attachment of Maize Header 289
8133 Area measuring 290
8134 Main crop elevator 290
8135 Concave/Initial Settings 291
8136 Threshing cylinder 291
8137 Rotary Separator 291
8138 Shaker shoe 292
8139 Straw walkers 292
81310 Bottom auger cover plate 293
81311 Scrapers 293
81312 Rear beater curtain 293
81313 Straw chopper 294
81314 Maxi Spreader 294
814 Harvest settings 295
8141 Harvest charts and settings 295
815 Threshing 297
8151 Threshing Directions 297
9 Transmissions 299
91 Safety precautions 301
911 Safety Precautions, Transmissions 301
92 Adj ustment of Transmissions 302
921 General 302
922 Threshing unit clutch 302
923 Hydrostatic transmission 303
93 T ransmissions 304
931 Rear beater 304
8
FENDT 8370 P – 8400 P – EAME
D3151100M4 -SIN 580010001
Table of contents
932 Crop Elevator and Table 304
933 Straw chopper 305
934 Threshing cylinder 305
935 Unloading auger 306
936 Shaker Shoe and Chaff Spreader Counter Drive, and Straw Walker Drive 307
937 Filling and Returns System Countershaft 308
938 Returns Elevator and Returns Thresher 308
939 Tank Filling Elevator and Tank Filling Auger 309
9310 Dust aspirator 309
9311 Rotary screen 310
9312 Fanning mill 311
9313 Rotary Separator 311
9314 Alternator and Fan 312
9315 Climate control 312
94 T ransmission Diagrams 313
941 Transmission Diagram, Left-Hand Side 313
942 Transmission Diagram, Right-Hand Side 315
10 Hydraulics 317
101 Safety p recautions 319
1011 Safety Precautions, Hydraulic System 319
102 Hydraulic System 320
1021 Hydraulic system, standard combine 320
1022 Hydraulic System, Four-Wheel Drive 321
103 Oil change 322
1031 Draining and refilling hydraulic oil 322
104 Filter Change 323
1041 Filter change in general 323
1042 Return Oil Filter 323
1043 Storage of Hydraulic System 324
105 Auxiliary Hydraulics 325
1051 Auxiliary hydraulics in general 325
1052 Functions and Auxiliary Hydraulics 325
1053 Reel Adjustment Fore/Aft – Up/down 325
106 Hydraulic diagrams 326
1061 Hydraulics Diagram, Standard Combine 326
1062 Hydraulics Diagram, Auto Level Combine 329
1063 Hydraulics Diagram for Chaff Spreader 331
1064 Hydraulics diagram for Maxi Spreader 332
11 Maintenance 335
111 Safety p recautions 337
1111 Safety Precautions, Maintenance 337
112 Undercarriage 339
1121 Undercarriage in general 339
1122 Wheel Nut Torques 339
1123 Tyre Pressure 339
1133 Lubrication Intervals 341
1131 Lubrication chart, time intervals 341
1132 Lubrication chart, right- and left-hand side 344
1133 Lubrication chart, main crop elevator and front axle 346
1134 Lubrication points, left-hand machine side 347
1135 Lubrication points, right-hand machine side 361
1136 Lubricants and Operating Fluids 372
1137 Preliminary Service Inspections 373
1138 Maintenance Required 374
114 Oil Change, Gear 377
1141 Gearbox 377
1142 Final drives 377
1143 Right-angle gear for returns thresher 378
115 Climate control 379
1151 Diagram for Climate Control System 379
FENDT 8370 P – 8400 P – EAME
1152 Maintenance 379
116 Cleaning and Off-Season Storage 380
1161 Cleaning 380
1162 Off-season Storage 381
11 63 Storage of Engine, Fuel System and Hydraulic System 382
11 64 Periodical Start-Up 382
11 65 Removal of Crop Elevator 383
11 66 Removal of Elevator Chains 383
11 67 After Off-Season Storage 383
11 7 Adjustment of Brakes 384
11 71 Adjustment of Foot Brakes, Disc Brakes 384
11 72 Adjustment of Parking Brake 384
12 Electrical System 385
121 Safety precautions 387
1211 Safety Precautions, Electric System 387
122 Electrical System 388
1221 Charging system 388
1222 Electric Boxes and Main Switch 389
1223 External connectors 12V 390
123 Electro-Hydraulic System 392
1231 Electro-Hydraulic System in general 392
124 Key to Signatures for Wiring Harness 393
1241 Wire Codes 393
1242 Component Codes 393
125 Overview, Electric Box and Cab 394
1251 Position of Connectors in Electric Boxes 394
1252 Fuses and Relays, Electric Box and Cab 395
126 Wiring diagrams 397
1261 Key to symbols 397
1262 Diagrams overview 398
1263 Fuse Ratings 398
1264 Components 399
1265 Wiirrii ng diagrams 407
13 Speecciiffiic ations 421
131 SpDeecc巾ifi cations 423
1311 Dimensions and specifications 423
FENDT 8370 P – 8400 P – EAME
D3151100M4 -SIN 580010001
Table of contents
1 General Information
1 1 Dear Customer 13
111 Appropriate Use 13
112 Changes and Improvements 13
113 Directives 13
114 Preface 14
115 EC Declaration of Conformity for Combine and Table 15
116 Product Identification 18
117 Sketch and parts identification 19
118 Disposal 20
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.M