Case C D L LA R S V VA Classic Tractor Shop Manual
sample content from manual
RENEW WHEEL AXLE, BEARINGS OR BULL GEAR
Support tractor and remove wheel and tire unit
Remove final drive housing oil pan and bearing retaining nut support bull gear and bump wheel axles haft towards wheel side and with draw axle shaft and outer
bearing cone. Bull gear, take-up washer and shims will come from below Bearing cups are position in housing by snap rings. Inner bearing cup can be driven out it a driver inserted
from the wheel side of the housing, and the outer bearing up with a driver inserted from the inner side.
Reassembly is reverse of disassemble. The oil seal of felt and treated the outer bearing cone retaining snap ring
Reassembly-is reverse of disassemble. select shims between outer bearing carrier and housing to remove al bearing play without causing
DRIVE CHAINS, SPROCKETS, BULL GEAR & PINIONS
This section applies to the drive chains and sprockets located in the transmission housing on series C,D,L,LA,R AND S and to the bull gears and pinions on series VA aeccept model VHA. For series chains and sprockets which are carried in the
finalize housing on models DCS and DS or to the bull gears and pino
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at heydownloadss @gmail.com should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
Reviews
There are no reviews yet.